Canon PIXMA E410 Printer Driver & Manual Installer

Monday, June 5th 2017. | PIXMA E

Canon PIXMA E410 Printer Driver & Manual Installer For Windows, MacOS and Linux – Known as multifunction printer, you can use this printer well for several standard functions including printing, scanning, and also copy. Other than that, by using PIXMA E410, you will get a faster printer with vivid, crisp, and bright color result. Introduced with a compact design and also smaller in both size and dimension, you do not have to worry when your working place is too crowded and cramped.

Besides you can get the sophisticated result by using Canon E410, you also need to make sure that you have already used the original cartridge for this printer, such as PG-47 for the black-ink while CL-57S refers to color-ink. The speed becomes its strength since it can produce around 8ipm for monochrome printing, while for color printing it only needs 4ipm. For better usage, you can save up your money since this printer is really cost effective.

Supported with Auto Power On, Canon PIXMA E 410 can work better since this printer can detect whenever you are ready with your document, and if up to the set time you are not using the printer, it will turn the engine off automatically. The Quiet Mode also ready useful since you can reduce the sounds produced by this printer.

Also, update driver: Canon PIXMA IP8700 Printer Driver Manual For Windows, Mac and Linux

COMPATIBILITYSPECIFICATIONHOW TO SETUPDOWNLOAD LINKS

Canon PIXMA E410 Operating System Compatibility

Windows 10 / Windows 10 (x64) / Windows 8.1 / Windows 8.1 (x64) / Windows 8 / Windows 8 (x64) / Windows 7 / Windows 7 (x64) / Windows Vista / Windows Vista (x64) / Windows XP / Windows 2000 / Windows Me / Macintosh / Mac OS X (10.11/10.10/10.9/10.8/10.7/10.6) / Linux

Canon PIXMA E410 Specification

Printer
Maximum Printing Resolution4800 (horizontal) x 600 (vertical) dpi
Print Head / InkTypeFINE Cartridge
Number of NozzlesTotal 1,280 nozzles
Ink CartridgePG-47, CL-57S
Print SpeedDocument: Colour:ESAT / SimplexApprox. 4.0ipm
Document: B/W:ESAT / SimplexApprox. 8.0ipm
Printable WidthUp to 203.2mm (8-inch)
Printable AreaBordered PrintingTop margin: 3mm, Bottom margin: 16.7mm,
Left / Right margin: each 3.4mm
(Letter / Legal: Left: 6.4mm, Right: 6.3mm)
Recommended Printing AreaTop margin: 31.6mm
Bottom margin: 29.2mm
Paper SizeA4, A5, B5, Letter, Legal, 4 x 6″, 5 x 7″, Envelopes (DL, COM10), Custom size (width 101.6 – 215.9mm, length 152.4 – 676mm)
Paper Handling
Rear Tray
(Maximum Number)
Plain PaperA4, A5, B5, Letter = 60, Legal = 10
Photo Paper Plus Glossy II (PP-201)4 x 6″ = 20, 5 x 7″ = 10
Glossy Photo Paper “Everyday Use” (GP-601)4 x 6″ = 20
EnvelopeEuropean DL / US Com. #10=5
Glossy Photo Paper (GP-508)4 x 6″ = 20
Canon Oce Red Label Paper (WOP111)A4 = 60
Canon Oce Office Colour Paper (SAT213)A4 = 50
Paper WeightRear TrayPlain Paper: 64-105 g/m2, Canon specialty paper: max paper weight: approx. 275 g/m2(Photo Paper Plus Glossy II (PP-201))
Ink End SensorDot count
Print Head AlignmentManual
Scan
Scanner TypeFlatbed
Scanning MethodCIS (Contact Image Sensor)
Optical Resolution600 x 1200dpi
Selectable Resolution25 – 19200dpi
Scanning Bit Depth (Input / Output)Grayscale:16bit / 8bit
Colour:48bit / 24bit (RGB each 16bit / 8bit)
Line Scanning SpeedGrayscale:1.2ms/line (300dpi)
Colour:3.5ms/line (300dpi)
Scanning SpeedReflective:
A4 Colour / 300dpi
Approx. 19secs
Maximum Document SizeFlatbed:A4 / Letter (216 x 297mm)
Copy
Maximum Document SizeA4 / Letter (216 x 297mm)
Compatible MediaSize:A4, Letter
Type:Plain Paper
Image QualityPlain Paper: Draft, Standard
Copy SpeedDocument: ColoursFCOT / SimplexApprox. 30secs.
sESAT / SimplexApprox. 1.8ipm
Multiple CopyBlack / Colour1 – 21 pages
General Specifications
InterfaceUSB B PortHi-Speed USB
Operating EnvironmentTemperature: 5 – 35°C
Humidity: 10 – 90% RH (no dew condensation)
Recommended EnvironmentTemperature: 15 -30°C
Humidity: 10 – 80% RH (no dew condensation)
Storage EnvironmentTemperature: 0 – 40°C
Humidity: 5 – 95% RH (no dew condensation)
Quiet ModeAvailable
Acoustic Noise (PC Print)Photo (4 x 6″)*11Approx. 46.0db(A)
PowerAC 100-240V 50 / 60Hz
Power ConsumptionOFF:Approx. 0.4W
Standby (scanning lamp is off):Approx. 1.0W
Copying
Printing(Wireless LAN connection to PC)
Approx. 9W
EnvironmentRegulationRoHS (EU, China)*, WEEE (EU)*

*To be fixed

Eco-LabelEnergy Star*

*To be fixed

Dimension (W x D x H)Approx. 426 x 306 x 145mm
WeightApprox. 3.4kg

Canon PIXMA E410 Driver & Software Installations

Method 1: How To Install The Canon PIXMA E410 Driver With Free Download

In this case, we are going to install Canon PIXMA E410 without CD (Automatic Wizard)

What you need:

  1. You are required to have a driver setup or the software file of Canon PIXMA E410. For the file of the driver setup, you simply click the link below for the download.
  2. You also obliged to have the USB cable as the connector from the printer to the computer that you will get from the printer package.

Next, follow the instruction on how to install Canon PIXMA E410 printer with the Setup File.

  1. First, of course, you need to turn on the computer as well as the Canon E410 as well.
  2. Still, try not to connect the PIXMA E410 printer USB cable first before it is suggested.
  3. Download the driver setup of Canon PIXMA E410 and install it in your computer by following all of the instruction for the installation progress.
  4. Then connect the USB cable of Canon E410 when the installation of the driver setup is already finished. In this case, the wizard will analyze when the USB cable has already connected. When the USB cable of Canon PIXMA E410 already detected in the computer, it will go to further instructions.
  5. Follow the wizard instructions to finish the installation process.
  6. When it is finished, the Canon E410 printer can be used for the printing process.

Method 2: How To Install Canon PIXMA E410 Drivers Manually

When you choose this method, you need the help of “Add a printer” option from the Windows inbuilt feature.

What you need:

  1. You are obliged to have the Software/Driver Setup file of Canon PIXMA E410. You can try to download it from the links provided.
  2. You also require the USB cable of Canon PIXMA E410 printer.

How to install:

  1. The first step, turn on all of your devices, in this case, are the computer and the Canon PIXMA E410 printer.
  2. Connect the USB cable of Canon E410 from the printer to the computer.
  3. Next, extract PIXMA E410 setup file and also their extracted location (it will be commonly found in TEMP folder)
  4. Click Start à Control Panel à View Devices & Printer (for Windows 7 and Vista OS). For XP OS, you can click on “Fax & Printers.
  5. Click on “Add a printer.”
  6. When it has been ready and adjusted for the driver’s location, give it the path where you extracted the setup file.
  7. Follow all of the wizard instructions to finish the installation.
  8. When you have done, you can use the Canon PIXMA E410 printer is ready to be used on your computer.

Method 3: Canon PIXMA E410 Driver Free Download Installations

How to install Canon PIXMA E410 Printer with software CD (Automatic Wizard)

What you need:

  1. You require CD/DVD drive installed on your personal computer.
  2. A Software/Driver CD Disk of Canon PIXMA E410 that included with the printer package is needed.
  3. USB Cable as the connector of the printer and computer that included in the printer package.

Follow these instructions for the further installation process of Canon PIXMA E410 printer with CD Drive.

  1. First of all, do not forget to turn on your computer and also the Canon PIXMA E410 printer.
  2. Do not plug in the USB cable of PIXMA E410 printer until needed.
  3. Insert Canon E410 CD disk to the CD/DVD drive on your personal computer and follow the setup wizard from the CD. Follow all of the instructions for the installation.
  4. Connect the USB Cable of PIXMA E410 printer to the computer when the setup wizard asks you to plug in the USB Cable.
  5. Wait until the USB cable Canon E410 is detected and follow the wizard instructions for the further process of the installation.
  6. When it is done, you will find out the Canon PIXMA E410 printer is ready to use.

How to Install Canon PIXMA E410 Printer Driver on Linux

Requirements:

  1. A Linux-run device
  2. A Common Unix Printer Service (CUPS) installed on the device.

Guidelines:

  1. Run the computer and run the CUPS.
  2. Visit the web-based interface.
  3. Open a browser and navigate to localhost: 631.
  4. Connect the printer.
  5. On the browser, go to Administration tab and select Printers.
  6. Select Add Printer.
  7. Enter username and password.
  8. Your printer (Canon PIXMA E410) should be on the list displayed. Select it and press Continue.
  9. CUPS detect and add the printer.
  10. A configuration window will pop up, fill values as needed.
  11. The printer is ready to use.

How to Uninstall Canon PIXMA E410 Printer Driver

For Windows:

  1. Look for the Windows button on your device’s keyboard.
  2. Select Control Panel.
  3. Look for Uninstall a Program tab, select it.
  4. Look for the name of the printer driver you wish to uninstall.
  5. Click on the Uninstall button.
  6. Wait until the process is done.

For Mac:

  1. Open Apple Menu.
  2. Select System Preferences.
  3. Select Printers and Scanners.
  4. Choose a printer driver that you wish to uninstall. (Select Canon PIXMA E410 if your printer is of that type.)
  5. Click Remove.

For Linux:

  1. Go to Application.
  2. Select System Settings.
  3. Select Printers. Printer window will pop up.
  4. Locate Unlock button on the upper right section, select it.
  5. Enter password.
  6. Locate the Canon PIXMA E410 printer driver your wish to uninstall. Find a minus sign under it.
  7. Click the minus sign.

PIXMA E410 Wireless Connection Setup

(Note: If the printer is compatible with wireless)

Connecting with WPS

Requirement:

  1. Physical WPS push button must be present.
  2. The network must use WPA or WPA2 security.

Step 1

  1. Press printer’s Home button.

Step 2

  1. Use navigation arrows to select WLAN Setup icon.
  2. Press the left function button.

Wi-Fi lamp will light up after enabling wireless connection. Printer searches for access that supports WPS.

Step 3

  1. Press and hold WPS button for 5 seconds, release.
  2. Press OK button after 2 minutes.
  3. After the connection is made, press OK to complete setup.

Install software for PIXMA E410.

If the connection still fails, please contact manufacturer.

Standard Connection Method

Step 1

  1. Press printer’s Home button.

Step 2

  1. Use navigation arrows to select WLAN Setup icon.
  2. Press the left function button.

Wi-Fi lamp will light up after enabling wireless connection. Printer searches for access that supports WPS.

Step 3

  1. Press the Stop/Reset button
  2. Select Standard setup then press OK button to start process of standard setup.

Printer is searching for available wireless network.

  1. Use navigation arrows to select access point (the name of your network). Press OK.

Press left function button to search again if you cannot see your network on the list.

  1. Press OK to input/edit network password (case sensitive).

Use the virtual keyboard to enter a password. Follow the procedure as instructed:

  1. Password is case sensitive. Press the center function button to navigate between numeric, upper case, and lower case.
  2. Use navigation arrows to pick a character on the keyboard, press OK to confirm selection, and move another character.
  3. Repeat step (a) and (b) for more characters to input.
  4. After inputting password, press left function button to complete.
  5. Confirm your password. Press OK to edit, if needed.
  6. Press left function button to complete setup. Press OK.

Follow by installing software for PIXMA E410.

If the connection still fails, please contact the manufacturer.

PIXMA E410 – factory default settings

Step 1

  1. Press printer’s Home button.

Step 2

  1. Use navigation arrows to select Setup icon.
  2. Press the right function button.

Step 3

  1. Use left navigation arrow to select Device Settings.
  2. Press OK.

Step 4

  1. Use up navigation arrow to access LAN settings.
  2. Press OK.
  3. Use down navigation arrow to select Yes for reset setting.
  4. Press OK.
  5. WLAN Settings now reset. A message [Processing….Please wait momentarily] is shown.
  6. Press OK to complete resetting WLAN.

If you have a printer Canon PIXMA E410, then you will need to surely have the official driver & software to install your printer. If you have none, then you will be glad to know that canonprinterseries.com will give you the official driver & software that you can directly download from this link below. Of course, the steps by step are also easy to follow.

Operating SystemVersionSizeDownload
PIXMA E410 Full Driver & Software Package (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)1.147 MBDownload
PIXMA E410 MP Drivers (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)1.0019 MBDownload
PIXMA E410 XPS Printer Driver (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64)5.7518 MBDownload
My Printer (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)3.3.05.6 MBDownload
Easy-WebPrint EX (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)1.6.015 MBDownload
Easy-PhotoPrint EX (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)4.5.058 MBDownload
My Image Garden (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)3.3.0293 MBDownload
Quick Menu (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)2.6.19.2 MBDownload
PIXMA E410 Full Driver & Software Package (OS X 10.11/10.10/10.9/10.8/10.7/Mac OS X 10.6)1.28.7 MBDownload
PIXMA E410 CUPS Printer Driver (OS X 10.11/10.10/10.9/10.8/Mac OS X 10.7)12.4.0.016 MBDownload
ICA Driver (OS X 10.6)3.3.43.1 MBDownload
E404 series CUPS Printer Driver (OS X 10.6)11.8.0.015 MBDownload
ICA Driver (OS X 10.11/10.10/10.9/10.8/Mac OS X 10.7)4.1.32 MBDownload
Quick Menu (OS X 10.11/10.10/10.9/10.8/Mac OS X 10.7)2.6.12.2 MBDownload
My Image Garden (OS X 10.11/10.10/10.9/10.8/Mac OS X 10.7)3.2.0299 MBDownload
IJ Scan Utility (OS X 10.11/10.10/10.9/10.8/Mac OS X 10.7)2.1.621 MBDownload
Easy-PhotoPrint EX (OS X 10.11/10.10/10.9/10.8/Mac OS X 10.7)4.6.0102 MBDownload
Quick Menu (OS X 10.6)2.5.02.4 MBDownload
My Image Garden (OS X 10.6)3.1.0298 MBDownload
IJ Scan Utility (OS X 10.6)2.0.1220 MBDownload
PIXMA E410 IJ Printer Driver for Linux (debian Packagearchive)4.101.4 MBDownload
PIXMA E410 IJ Printer Driver for Linux (rpm Packagearchive)4.101.5 MBDownload
ScanGear MP for Linux (Source file)2.302.5 MBDownload
IJ Printer Driver for Linux (Source file)4.107.3 MBDownload
PIXMA E410 ScanGear MP for Linux (debian Packagearchive)2.301.2 MBDownload
PIXMA E410 ScanGear MP for Linux (rpm Packagearchive)2.301.2 MBDownload

Also, update driver: Canon PIXMA IP8770 Printer Driver & Manual PDF

Canon PIXMA E410 Printer Driver & Manual Installer For Windows, MacOS and Linux

You do not have to go into another website ever since you will get the driver of Canon PIXMA E410 on canonprinterseries.com that provides a download link for the driver & software directly from the Canon official site. Just click on the download web link available below and follow the manual instruction or you can also download user manual below to complete the installation process.

Canon PIXMA E410 Driver & Software Download